American Jetter Tested and Certified for actual GPM & PSI
You Can Now Have the Best of Both Pressure and Flow in a Single Jetter!
Physics says we cannot have Max Flow and Max PSI at the nozzle at the same time. Here's how we overcome that fact and give you the best of both worlds. The information below shows how we maximize the nozzles effectiveness guided by our common goals and physics (pump efficiency, hose ID & length). Whether you want to use our Cutter Nozzles to descale, cut roots and grease or use our Flusher Nozzles to remove rock and debris, we have you covered!
AJ Tested Key Features: (Things I would want to know when comparing jetters, Andy Whitehead)
- Rated No Load Flow (No Nozzle) 21.6 GPM (Most common pump rating test)
- Flow with 1/2" Hose (Best nozzle PSI/GPM mix considering hose ID and pressure loss through hose)
- Cutter "PSI" Nozzles (Red) approximately 15 GPM @ 4000 Pump PSI (58 HP used) Nozzle PSI: 300' 3450 PSI, 500' 3100 PSI (Reaper root cutting effectiveness starts at about 2800 PSI @ 6" in our test)
- Flusher "GPM" Nozzles (Blue) approximately 18.5 GPM @ 4000 Pump PSI (71.56 HP used) Nozzle PSI: 300' 3100 PSI, 500' 2750 PSI (Plenty of power left for effective flushing)
- We include GPM nozzles because the flow and the power is there to do it. We offer 23% More Flow @ Max PSI than most jetters in this class! More flushing power when you need it!
System Specifications:
Ultra Compact Skid Dimensions
-
Skid Dimensions: 48" Wide x 36" Deep x 47.5" High (less tank)
-
220 Gallon Tank Dimensions 48L X 30.5W X 37H
- Approximate 4' x 7' Footprint with above 220 Gallon Tank
- Approximate 4' x 66.5" Footprint with 150 Gallon Tank, 50" Wide 53" High at Tank
Engine:
- Dual 38 HP, Kohler Command Low Profile Air Filter, Electronic Fuel Injection (EFI), Engines (New SAE J1940 Standards) 999cc
- Save 20%+ Fuel Cost over Carburetor Engines
- Instant Start at Any Altitude, Instant Throttle Response, No Choking, No More Gummed Carbs from the 10% Ethanol in Most Fuels
-
Vibration Dampening System
-
Quick Oil Drain Valve
-
3 Year Engine Warranty
-
Tach and Hour Meter for Easy Maintenance Scheduling
-
12 Gallon Fuel Tank
-
Engines Can be Run Alone or Together
-
Fused 12 Volt Outlet, Power Lights for Night Work, Camera or Other Accessories
Pump:
-
Dual Rated 10.8 GPM 4000 PSI Udor Pumps (21.6 GPM Open Flow, 4000 PSI) Why We Do It!
-
Poly Chain Belt Drive Industrial Plunger Pumps by Udor
-
Pumps have a 5 year Warranty Through Udor USA
-
Pressure Relief Valve on Pump (relieves pressure in case of unloader failure)
-
Adjustable 0-4000 PSI, 0-21 GPM
-
Pulse Valve on Pump Allows for Various Pulse Modes when Jetting
-
Quick Oil Drain Hose
Tank:
- 220 Gallon Tank with 1 1/2" Drain (standard tank 48" x 30.5" x 37" High)
- Pumps Bypass Circulates Through 220 Gallon Tank Virtually Eliminating Pump Overheating
- Tank has Dual Float Valves for Overflow Prevention and Fast Fill-Up
- Low Water Shut-off
- Water Filtration System for each Pump
- Standard Garden Hose Connection with Filter
Electric Jetting Hose Reel:
-
Gearmotor, Gear Reduction Electric Reel Makes for Easy Wind & Unwind of Hose (Twice as Strong as the 53 Amp, 12 Volt Option) (optional hose guide shown)
-
Includes 300' Foot 1/2" Sewer Hose with 10' Leader Hose (Maximum 500' 1/2" Hose Without Upgrade)
-
Hose Reel Speed Control - Controls Speed of Hose "IN" and Hose "OUT" for Precise Cleaning
-
On/Off Switch Prevents Accidental Hose Reel Activation
Portable Hose Reel:
-
Manual Reel Holds up to 200' of 3/8" Hose
-
150' of 3/8" Jetting Hose Included
Foot Valve:
-
Detachable High Flow Foot Valve for Hands Free Operation and Allows for Indoor Jetting Using Portable Reel Without Loss of Safety
-
Works with Main Electric Reel or Portable Reel (simple quick connects move it from one location to another.)
PSI Cutter Jetting Nozzles: Custom Drilled for Max PSI at the nozzle for 1/2" Hose approximately 15 GPM (Full Pump PSI, Best nozzle PSI/Flow Mix considering hose ID and pressure loss)
- Rated Open Flow 21.6 GPM (approximately 0 Pump PSI, no nozzle)
- Reaper Cutter (Red) Max Root/Grease Cutting Power. 1 Forward 360* Coverage Rotating Jet and 4 Rear Stationary Jets)
- Thruster (Red) (1 Forward Jet, Remaining Rear) driilled for Max PSI approximately 15 GPM Flusher (Red) (All Rear Jets) for Max PSI approximately 15 GPM
- Deicer/Degreaser (Red)(3 Forward Jets, Remaining Rear) for Max PSI (approximately 15 GPM)
- Nozzle Cleanout Tool
GPM Flusher Jetting Nozzles: Custom Drilled for Max PSI at the nozzle for 1/2" Hose approximately 18.5 GPM (Full Pump PSI, Best nozzle Flow/PSI Mix considering hose ID and pressure loss)
- Reaper Flusher (Blue) Max Flushing GPM Power (1 Forward 360* Coverage Rotating Jet and 4 Rear Stationary Jets)
- Thruster (Blue)(1 Forward Jet, Remaining Rear) drilled for Max GPM
Pressure Washer:
-
Can be Used as a Powerful Pressure Washer
-
Pressure Washer Gun and Nozzles included
-
50' Pressure Washer Hose Included
Accessories Included:
- 36" Tiger Tail (protects hose entering manhole)
-
Gloves, Safety Glasses, Safety Vest
-
Quick Connect Adapter for Main Hose to Foot Valve (connects main hose to foot valve for portable reel operation)
-
Extra Quick Connects, O-rings, Etc
Options Available:
- Wireless Remote: (Pro: Engine Start/Stop, Water On/Off, Hose Reel In/Out, 1 Mile Range)
- 150 Gallon Tank: Approximate 4' x 66.5" Footprint, 50" Wide 53" High at Tank
- Reel Capacity Upgrade: Up to 600' of 1/2" or 5/8" Hose Capacity
- 5/8" Hose: Max PSI at All Flows: AJ Tested, Cutter 15 GPM @ 4000 PSI Nozzle PSI: 300' 3550 PSI, 500' 3450 PSI, Flusher 18.5 GPM @ 4000 PSI, 300' 3400 PSI, 500' 3250 PSI
- Dual Reel Gearmotors (4X as strong as the 53 Amp, 12 volt option)
- Hydraulic Powered Reel: Max Pullng Power for Those Tough Jobs
- Hose Reel Guide: Roller System for Easier Winding of Hose
-
Anti-freeze System: Prevent Freeze, Reuse Anti-Freeze
-
Recirculation System: Prevent Freeze During Transit
- Chemical Injection: A Little Extra Cleaning Punch or Sanitizing
- Wart Hog Jetting Nozzle: For Maximum 360* Cleaning Power
- Root Rat Nozzle: Descale and Clean with Cable or Chains
- Reaper Nozzle: The most effective rotating front jet nozzle in our test
- GPM/PSI: 2440 (i.e. 24 GPM 4000 PSI), 2140, 1640 Call for Quote
Don't see what you need or have questions? Give us a call.