Van Kit 2040 - 76 HP EFI, True 20 GPM@4000 PSI, 220 Gallon

$30,166.00
(No reviews yet) Write a Review
SKU:
AJVK2040EFI
Shipping:
Free Shipping
True 20 GPM @ 4000 PSI with 5/8" Hose = 32% More Cutting & Flushing Water Power at the Nozzle, 42% More Nozzle Horsepower @ Max PSI! (See Chart Below!)
 
 
Sources & Resulting Chart: Using StoneAge & Gates Pressure/Flow Calculators
 
 
Best in Class of Both GPM & PSI! (Adjustable, to use virtually any nozzle!)
 
  • MAX GPM! Out performs all 15-20 GPM jetters at the nozzle with less than 73 HP gas or less than 69 HP diesel! Most only carry about 15 GPM, even when rated up to 20 GPM, (Why? Less GPM = Less Power Needed, 1/2" hose PSI loss is extremely high over 15 GPM)
  • MAX PSI! 76 HP to hold 4000 PSI @ the pump at a true 20 GPM flow = Maximum GPM & PSI achieved at the nozzle - (Overcomes GPM/PSI loss through the hose the best possible way!)
  • 5/8" ID Hose! Field repairable, with 1/2" NPT ends, delivers more nozzle PSI power over standard 1/2" ID hose @ 20 GPM - where it counts! (Gain 756 PSI @ 300', 1259 PSI @ 500', Accesses the true potential of 20 GPM!
  • Tuned Nozzles: System Tuned for Max GPM / PSI, (Make your cutting / flushing nozzles perform better than ever!)

Ultra Compact Skid Dimensions

  • Skid Dimensions: 48" Wide x 36" Deep x 47.5" High (less tank)
  • 220 Gallon Tank Dimensions 48L X 30.5W X 37H
  • Approximate 4' x 7' Footprint with above 220 Gallon Tank
  • Approximate 4' x 66.5" Footprint with 150 Gallon Tank, 50" Wide 53" High at Tank
Engine:
  • Dual 38 HP, Kohler Command Low Profile Air Filter, Electronic Fuel Injection (EFI), Engines (New SAE J1940 Standards) 999cc
  • Save 20+% Fuel Cost over Carburetor Engines
  • Instant Start at Any Altitude, Instant Throttle Response, No Choking, No more gummed Carbs from the 10% Ethanol in most fuels
  • Vibration Dampening System
  • Quick Oil Drain Valve
  • 3 Year Engine Warranty 
  • Tach and Hour Meter for Easy Maintenance Scheduling
  • 12 Gallon Fuel Tank
  • Engines Can be ran Alone (up to 10 GPM @ 4000 PSI) or together (20 GPM @ 4000 PSI)
  • Fused 12 Volt Outlet, Power Lights for Night Work, Camera or other Accessories
Pump:
  • Dual 10.8 GPM 4000 PSI  Pumps ( (2) CKC 34/25-S, 21.72 GPM @ 4000 PSI, 1750 RPM, Udor Approved Spec to overcome any efficiency loss) Why We Do It!
  • Poly Chain Belt Drive Industrial  Plunger Pumps by Udor 
  • Pumps have a 5 year Warranty Through Udor USA
  • Pressure Relief Valve on Pump (relieves pressure in case of unloader failure)
  • Fully Adjustable Throughout Entire Range 0-4000 PSI 0-20 GPM
  • Pulse Valve on Pump Allows for Various Pulse Modes when Jetting
  • Quick Oil Drain Valve
Tank:
  • 220 Gallon Tank with 1 1/2" Drain (standard tank 48" x 30.5" x 37" High) 
  • Pumps Bypass Circulates Through 220 Gallon Tank Virtually Eliminating Pump Overheating
  • Tank has Dual Float Valves for Overflow Prevention and Fast Fill-Up
  • Low Water Shut-off
  • Water Filtration System for each Pump
  • Standard Garden Hose Connection with Filter
Electric Jetting Hose Reel:
  • 24 Volt Gearmotor, Gear Reduction Electric Reel Makes for Easy Wind &  Unwind of Hose (Twice as strong as the 53 Amp, 12 volt option) (optional hose guide shown)
  • Includes 300' Foot 5/8" Thermoplastic Sewer Hose with 1/2" NPT Ends (Maximum 400' 5/8" Hose without upgrade)
  • Hose Reel Speed Control, Control Speed of Hose "IN" and Hose "OUT" for Precise Cleaning
  • On/Off Switch Prevents Accidental Hose Reel Activation
Portable Hose Reel:
  • Manual Reel Holds up to 200' of 3/8
  • 150' 3/8" Jetting Hose Included
Foot Valve:
  • Detachable High Flow Foot Valve for Hands Free Operation and Allows for Indoor Jetting Using Portable Reel Without Loss of Safety
  • Works with Main Electric Reel or Portable Reel (simple quick connects move it from one location to another.
Jetting Max GPM / PSI Nozzles: Custom Drilled for Maximum GPM / PSI at the nozzle
  • Rotojet (Free Spinning 360* coverage)
  • Thruster (1 Forward Jet, Remaining Rear)
  • Flusher (All Rear Jets)
  • Deicer/Degreaser (3 Forward Jets, Remaining Rear)
  • Nozzle Cleanout Tool
Pressure Washer:
  • Can be Used as a Powerful Pressure Washer
  • Pressure Washer Gun and Nozzles included
  • 50' Pressure Wash Hose Included

Accessories Included:

  • 36" Tiger Tail (protects hose entering manhole)
  • Gloves, Safety Glasses, Safety Vest
  • Quick Connect Adapter for Main Hose to Foot Valve (connects main hose to foot valve for portable reel operation)
  • Extra Quick Connects, O-rings Etc

Options Available:

  • 150 Gallon Tank: Approximate 4' x 66.5" Footprint, 50" Wide 53" High at Tank
  • Anti-freeze System: Prevent Freeze, Reuse Anti-Freeze
  • Recirculation System: Prevent Freeze During Transit
  • Reel Capacity Upgrade: Up to 600' 1/2" or 5/8" Hose Capacity
  • 1/2" Hose with Max PSI (15 GPM), Max GPM (20 GPM at lower PSI) Nozzles (See Chart): Lose 756 PSI at the nozzle pressure compared to 5/8" Hose @ 20 GPM, (we recommend the stock 5/8 hose for max nozzle GPM and PSI combination)
  • Dual 24 Volt Reel Gearmotors (4X as strong as the 53 Amp, 12 volt option)
  • Hose Reel Guide: Roller System for Easier Winding of Hose
  • Wart Hog Jetting Nozzle: For Maximum 360* Cleaning Power
  • Wireless Remote: (Pro: Engine Start/Stop, Water On/Off, Hose Reel In/Out, 1 Mile Range)

 

Have a jetter you would like to check the GPM on? Check out our Test by Known Nozzle Size Kit here